Electric Control Panel By Technogroovy

AUTOMATIC POWER FACTOR CONTROL PANEL (APFC):

Perfect power factor is required not only to save electricity charges but for better economization of cable and other current flowing equipment. Our strong Application experience helps us to design the Automatic Power Factor Panel (APFC) based on type of load and load cycle.  We manufacture thermistor based or contactor based panel with 7% to 14 % reactance to suit the application. Proper enclosure and selection of switchgear is critical for charging and discharging of capacitors.

 AUTOMATION & VARIABLE FREQUENCY DRIVE PANEL (VFD):

We understand VFD very well so we also take 

care of heat dissipation while designing these panels for better life of VFD and less cost of air-conditioning for long and trouble free operation. We have reduced air-conditioning cost in several power co-generation projects, by special panel designing.

CONTROL AND RELAY PANEL:

Control and Relay Panel receive power from PCC panel and give power to different sections of Plant / Building. This comprise of ACB, MCCB, MPCB, protection and measuring relays  based on type of industry and application.  Implementation of Lock out Tag out (LOTO) gives additional safety to users. Tripping sequence setting of circuit breakers give immense protection by avoiding wrong feeder tripping and chance of cascade tripping.

Technical Specifications

Enclosure : Fabricated with 1.6 /2 mm CRCA sheet and 3 mm sheet for Gland Plate with Bus duct flange and ample care for top/bottom termination, cable tie arrangement.

Rated Current : Upto 6300 Ampere Aluminium or Copper main bus bar. Operational Voltage.

Frequency : 380/415/440/690 Volt at 50/60 Hz, 3 Phase, 4 wire system.

Short Circuit Level : 35KA/50KA/70KA/100KA for 0.5/1/3 second.

IP Protection : Our CPRI Bhopal certification gives locational advantage like Indoor/ outdoor protection.

Automation : Smart system gives information to decision makers for strategy and analysis.

D.G. Synchronisation Panel:

Our vast automation experience give us technical edge over other fellow panel manufacturers for power management . We give good blend of PLC and DEIF relays for DG synchronization for multiple DG and multiple choice of auto or manual run systems. Most of the features can be seen and controlled from single console. Person sitting anywhere in the world can monitor and control these systems.

MOTOR CONTROL CENTRE PANEL (MCC): 

MCC receive power from PCC panel and give power to different sections of Plant / Building. This comprise of ACB, MCCB, MPCB, protection and measuring relays  based on type of industry and application.  Implementation of Lock out Tag out (LOTO) gives additional safety to users. Tripping sequence setting of circuit breakers give immense protection by avoiding wrong feeder tripping and chance of cascade tripping.

Technical Specifications:

Enclosure:- Fabricated with 1.6/2 mm CRCA sheet and 3 mm sheet for Gland Plate with Bus duct flange and ample care for top/bottom termination, cable tie arrangement.

Rated Current:- Upto 6300 Ampere Aluminium or Copper main bus bar. Operational Voltage.

Frequency :- 380/415/440/690 Volt at 50/60 Hz, 3 Phase, 4 wire system.

Short Circuit Level:- 35KA/50KA/70KA/100KA for 0.5/1/3 second.

IP Protection:- Our CPRI Bhopal certification gives locational advantage like Indoor/ outdoor.

Automation:- Smart system give information to decision makers for strategy and analysis.

POWER CONTROL CENTER PANEL (PCC):

This is the first point where power comes from Transformer and DG. Here circuit resistance is very low, which results in highest fault level. PCC panel must have proper fault level calculation. Bus bar, support, cooling and switchgear should be designed accordingly. This design help foreman power safety and optimum utilization of the system. We also give different color coding enclosures for electricity board/ DG and bus coupler for better understanding for the operator.

 

Technical Specifications

·         Enclosure : Fabricated with 1.6/2 mm CRCA sheet and 3 mm sheet for Gland Plate with Bus duct flange and ample care for top/bottom termination, cable tie arrangement.

·         Rated Current : Up to 6300 Ampere Aluminum or Copper main bus bar. Operational Voltage.

·         Frequency :  380/415/440/690 Volt at 50/60 Hz, 3 Phase, 4 wire system.

·         Short Circuit Level : 35KA/50KA/70KA/100KA for 0.5/1/3 second.

·         IP Protection : Our CPRI Bhopal certification gives location advantage like Indoor/ outdoor

·         Automation : Smart system gives information to decision makers for strategy and analysis.

     LT Control Panel:

Product Details:

Usage	Distribution Board
Brand	Jakpower
Type	Automatic
Color	White

We are offering LT Control Panels to our clients.

Specifications:

·         Max. Power: 300 W

·         Voltage: 380 - 460 V

·         Working Temperature: -40℃-+70℃

·         Length: Up to 1200 mm

PLC Scada Panel:

Product Details:

Approx Price: Rs 14,000 / Piece

Input Value	IEC 61850
Type	Semi-Automatic, Automatic
Digit Display Size	Dual Display

We are the leading suppliers of SCADA System and our product is made of good quality.

An acronym standing for supervisory control and data acquisition, SCADA refers to the system used for collecting data from various sensors at factory, plant as well as in other remote locations and then sending the collected data to a central computer that manages as well as controls the data. Here, our expertise lies in delivering latest technology based SCADA systems that include signal hardware (input and output), networks, controllers, user interface (HMI), software and communications equipment. 
This central system helps in usually monitoring data from various sensors that are either in close proximity or off site (sometimes miles away).
Some of the industries these are used in include:
Manufacturing.Water and sewage.Electric power generation.Supervisory control.Mass transit.

             VFD Panel:

Product Details:

Phase	Three Phase
Power	0.25-37 kW
IP Rating	IP33, IP40, IP44
Dimensions	As per client requirement

We are the leading suppliers of VFD Panels and our product is made of good quality.

Variable frequency drive (VFD) Panels made available by us are also known as digital VFD drives.

These form an important part of power panels that are used for VFD squirrel cage induction, in motor control applications.

Further, these variable frequency drive panels are also extensively tested on well defined operational parameters before being supplied to clients.

Here, our expertise lies in offering VFD (variable frequency drive) panels as per customer preference including abb and Danfoss.

    Features:-

·         Fine finish.

·         Highly durable.

·         Longer functional life.

Thanks & Regards

For Technogroovy

Mayank Kumar Singh

Sales Engineer (AC/DC Drives, PLC's & Electrical Panels)

(Technogroovy Systems)

Mob: +91-8218470498,+91-8860277055

Whatsapp-  +91-8860277055